Posts tagged ‘d800 oxidation’
Nikon service returned me my broken D800, the verdict being “Total loss: water infiltration or condensation caused oxidation in the camera circuitry: the camera cannot be repaired” (although still under warranty). I could not accept it: I asked around what to do against oxidation on circuitry boards. This is what I did:
1) I unscrewed the D800 plastic covers
2) I localized the oxidized areas on the main boards.
3) I unplugged the oxidized contact wires with eyebrow tweezers
4) With a 12.70 € fiberglass brush (ECOBRA 760 300 Made in Germany) I removed the oxidation from contacts, plates and boards (see pictures below and compare to these ones)
5) With ethanol 70% I cleaned the parts I touched to remove fingerprints and oxide powder
6) I closed back the camera body, turned the camera on and …
… it worked again! With 12.70 € I saved my mostly beloved 2700 € equipment. Below the first picture series shot with Niki, showing the three phases of these terrible days.
Overwhelming issue Sitting on pins and needles Finally unthorned!
Click on each picture to enjoy the clarity of my 16-35 mm f/4 on Niki, my reborn Nikon D800
After 52,842 shots and less than 3 years, artborghi’s much beloved Nikon D800 gave its last click.
Condensation/water infiltration in the camera body caused irrecoverable oxidation, as stated by Nikon repair service. Such sudden death, despite its weather-resistant life above the sea level, its companion the rain-proof backpack and the loving care of its owner.
In its short life, artborghi’s Nikon D800 was inspirational to 250 blog posts on artborghi.com, photo calendars, news articles, photo books (in preparation), a photo exhibition , scientific talks, weddings, portrait shootings and more.
It leaves behind 2.3 TB of .NEF and .JPG files, plus a plethora of unforgettable memories and happy moments.
Above, some pictures of the camera autopsy. Click to enlarge
R.I.P. miss Nikon 14.9.2012 / 14.2.2015 – you will not be forgotten